Some tips about the throttle does not work during use

The throttle does not work in the process of using

1. Check whether the brake is back in place. If the brake does not return, the brake is powered off, which will cause the power to fail;

2. Check whether the interface is off, the interface of the motor and the interface of linking the display. Step on the pedal to see if the motor will provide assistance. If so, there may be a problem with the display interface;

3. Discharge protection. During use, the screen suddenly does not light up and the motor is powered off. It may be due to battery discharge protection. During the use of the battery, the weight of payload capacity is 350lbs.If you climb a slope or the load exceeds the peak value, the battery will be in safety protection and the power will be cut off. This is to prevent the battery from heating up during the power interruption time, causing the battery to fail and it may catch fire in serious cases. The solution is to turn off the power, remove and reinstall the battery, With a pedal assist , the power will be restored.

4. If the controller doesn't work, it will be difficult for the wheels to turn. If you push and pull forcibly, the motor will burn out. At this moment, you can find the motor cable and unplug the socket, and the wheel will become lighter when it walks. In riding, at the starting stage, using the pedals first, and using the throttle assist is a relatively safe method, which can also provide higher endurance.